Line Sensor



Working Environment

Tools:

Enveronment: PlatformIO

Framework: Arduino

Code editor: Visual Studio Code

Hardware:
Mcu: STM32G030C8T6

Magnetic Sensor: QMC5883

How to build and Flash

Setup Visual studio Code
The VS code setup Instructions are available in Getting Started.
Setup Visual studio code according to the Host operating system. 

Install PlatformIo extension inside VS code
Install STM32 Platform in PlatformIo
Install Board support packages for STM32G0C038T6
Select the board and Framework as Arduino
Building and Flashing Application:
To build the application, clone the affbotics_software repo and go to the folder Line_sensor
Pull the repository locally
Navigate to the directory affbotics_software/firmware/avg/Line_sensor/

Select the COM port
Click Upload
Program Flow

Basic Workflow:
Firmware is present in affbotics_software/firmware/avg/Line_sensor/src/main.cpp
Line sensor communicates using Modbus over RS485
The Modbus I registers from address 0X1000 to 0X1003 can be read to obtain number of tracks, markers, Left track error and Right track error
Am a Geek:
Modbus Register address and SLAVE_ID can be changed by changing #define values
Uncomment the line #define DEBUGMODE 1 to continuously print raw sensor readings in CSV format through serial.
Track and marker threshold values can be tweaked by changing #define trackThreshold and #define markerThreshold

Experiments

Nov-25-2022
NFC tests
We have tested the possibility of having some instructions flashed into the NFC tags so that the AGV can read and process the data on the fly, but it turns out that its only possible while the AGV is moving slowly otherwise it can't read the data reliably. image